Do You Understand This Sealed Agm Battery? Individuals1 month ago - Multimedia - Los Angeles - 11 views
Three misunderstandings about Sealed Agm Battery
More batteries are driving into the trunk and under the seats of some vehicles. If the battery is not under the hood, it is most likely an absorbent glass mat (AGM) or a gel battery. The Sealed AGM Battery is a Sealed" target="_blank">https://www.cswldy.com/product/deep-cycle-battery//%22">Sealed Deep Cycle Battery, so it can avoid acid spills in accidents. They can also be installed at strange angles.
Manufacturers can save a few pounds of weight from the car because these batteries consume a lot of power due to their size and weight. This is an important reason why more and more people find them on rear-mounted models.
These are three misunderstandings about Sealed" target="_blank">https://www.cswldy.com/product/sealed-maintenance-free-battery-agm-battery//%22">Sealed Agm Battery:
You can use conventional battery chargers on AGM or gel batteries.
wrong. These batteries like to charge slowly. Many AGM/gel battery chargers have microprocessors that collect information from the battery and adjust the current and voltage accordingly. For liquid-filled, gel, and AGM batteries, some batteries have different settings. Overcharging will kill these batteries. In addition, the alternator is not a charger. Do not rely on the alternator to complete the work of the charger. If the battery is discharged to the point where it cannot be started, use the charger as soon as possible to ensure that the battery is fully charged.
The test methods for AGM and gel batteries are the same as traditional batteries.
wrong. These types of batteries have lower internal resistance than fully charged batteries. Older capacitor battery testers/analyzers may not be able to accurately read these batteries. Most new battery analyzers have special modes for AGM/gel batteries. Old-fashioned load testers may not be able to provide conclusive results.
The replacement of an AGM or gel battery is the same as that of a fully charged battery.
true and false. Although the battery installation method for the two battery types may be the same, some vehicles require additional steps to inform the vehicle that the battery has been replaced. Newer vehicles have battery sensor modules or similar systems. If the battery is replaced, these systems need to be recalibrated using the scanning tool. If the system is not recalibrated, the alternator may overcharge the new battery and cause the battery to fail shortly after replacement.